Sew Along – Work Bag (week5)

This week we are lining the bag and attaching the flap to the front. (only the cotton bag gets the flap)

Cotton Work Bag

Fold your lining fabric, right sides together, to roughly the right size for your work bag. Place the work bag on top of the fabric with at least a half inch from the top of the pasteboard. Mark around the edge of the fabric leaving enough space for a seam allowance.

2016-01-06-16.30.11-1.jpg.jpeg

Cut out along the line you marked. (In my case, notice that the livingroom scissors are now not suited for any fabric after the wrapping of gifts.)2016-01-06-16.31.03-1.jpg.jpeg

If you wish to add pockets to your lining, do so now on the right sides.

With the right sides together, sew the curved edge of the lining fabrics together. Some may wish to do two rows of stitching for strength.

 

Fold and press about 1/2″ of the straight edge of the lining to the outside.

 

Slide the lining inside the work bag (right side out).

 

Line the fold of the lining up so it is just below the edge of the outer fabric and pasteboard. (1-2mm) Pin as needed to keep everything lined up.

 

With a blind stitch or whip stitch, attach the lining to the outer fabric and pasteboard.

Finished with the lining.

2016-01-11-17.22.45.jpg.jpeg

The front flap attaches simply with a whip stitch through the flap layers of fabric and the front panel of the bag. You are just going through the fabric, not through the pasteboard. (I find it easier to start in the middle, work to one side > back across > back to the middle.)

 

—————————————————————————–

Silk Work Bag

Fold your lining fabric, right sides together, to roughly the right size for your work bag. Place the work bag on top of the fabric about a half inch from the top. Mark around the bag on the fabric leaving enough space for a seam allowance.

Cut out along the line you marked.

Cut a slit in from the top about 2.5″

 

2016-01-11-17.50.26.jpg.jpeg

If you wish to add pockets to your lining, do so now on the right sides.

With the right sides together, sew the curved edge of the lining fabrics together. Some may wish to do two rows of stitching for strength.

Slide the lining inside the work bag (right side out).

 

Line the fold of the lining up so it is just below the edge of the outer fabric and pasteboard. (1-2mm) Pin as needed to keep everything lined up.

With a blind stitch or whip stitch, attach the lining to the outer fabric and pasteboard.

***As you attach the lining, you are also creating a channel you will use later for the ribbon/cord to go through.

Finished with the lining.

Advertisements
Published in: on February 1, 2016 at 6:00 am  Comments (3)  
Tags:

3 CommentsLeave a comment

  1. So what is the purpose of the flap on the cotton bag? I thought it was going to become a needle book, but we don’t insert a page.

  2. We will. Just not in this step.

  3. Got it, thank you!


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: